| Customization: | Available |
|---|---|
| Screen Size: | No Screen |
| Use: | Automotive |
|
Still deciding? Get samples of $ !
Order Sample
|
| Shipping Cost: | Contact the supplier about freight and estimated delivery time. |
|---|
| Payment Methods: |
|
|---|---|
| Support payments in USD |
| Secure payments: | Every payment you make on Made-in-China.com is protected by the platform. |
|---|
| Refund policy: | Claim a refund if your order doesn't ship, is missing, or arrives with product issues. |
|---|
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
GSM Parameters | |
Communication protocol | TCP |
Maximum output | 32±3dBm |
Maximum frequency error | ±0.1ppm |
GPS Parameters | |
Frequency | L1,1575.42Mhz C/A code |
Tracking sensitivity | -162dBm |
Acquisition sensitivity | -148dBm |
TTFF | Avg.hot start <2s Avg.warm Start <28s Avg.cold start <38s |
Continuous working time Continuous static time | 20 minutes 12 hours |
Product Function | |
Vibration alarm/power failure alarm/low battery alarm/speed alarm/fence alarm/ACC alarm Real-time tracking and positioning/historical trajectory playback | |
1. This device can be connected to an external 9-90V power supply (Note: Due to the unstable charging voltage of electric vehicles and the instantaneous voltage is too high, the device should be used with caution on electric vehicles above 70V. It is best to connect to a car with a power supply below 70V.) |
2. Finally, fix the terminal in a hidden position in the car with double-sided tape or wire tying. Note: Do not install the terminal SIM card upside down. The terminal SIM card needs to activate the GPRS function and ensure that the terminal SIM card has a tariff. If your SIM has been turned on and requires a PIN code, please refer to your mobile phone user manual to turn off the PIN code input function when turning on the phone. |
3. Terminal location selection and installation This terminal is a high-tech Beidou GPS dual-mode positioning product. It is recommended that you choose a professional unit designated by the dealer to install and debug. It is recommended that the hidden installation of this terminal be carried out by a professional organization designated by the dealer. Please pay attention to the following matters: |
1)To avoid damage by thieves, the terminal should be located as hidden as possible. The following suggestions are made: Inside the decorative panel below the front windshield In the surrounding of the front instrument panel (non-metallic surface) Under the decorative panel below the rear windshield. |
2)Avoid placing it together with the transmitting source, such as reversing radar, signal transmitter and other positioning communication terminals. |
2)Avoid placing it together with the transmitting source, such as reversing radar, signal transmitter and other positioning communication terminals. |
Note: If the windshield is pasted with a metal insulation layer or heating layer, the GPS reception signal will be reduced, causing GPS to malfunction. Please change the terminal installation location. |
){kind=link}