Product Description
Product Function
| Communication Specification |
| Communication system |
4G LTE CAT1 |
| Band (Frequency ) |
LTE:B1/B3/B5/B8/B34/B38/B39/B40/B41 |
| Internal flash memory |
4MB(IP300) |
| Data Transfer Speed |
LTE:Max10Mbps(DL)/Max5Mbps(UL) |
| Module |
RC10EM-M3-SA : 2/4/5/28/34/38/39/40/41,466,520,12342 |
| BDS/GPS (BDS/GPS Specification) |
| GPS chipset |
UC6226 |
| GPS channel |
64 Channels |
| Location accuracy |
< 2.0m CEP |
| Tracking sensitivity |
-160db |
| TTFF |
Hot Start:< 1s,Warm Start:< 4s,Cold Start:< 28s |
4G wired GPS locator addresses signal blind spots, providing several key benefits:
1. Enhanced Accuracy: Using two IP addresses simultaneously improves positioning accuracy in areas with weak signals or blind spots.
2. Reduced Interruptions: If one IP signal is interrupted, the other IP can maintain continuous positioning data, reducing signal interruptions.
3. Fast Recovery: The dual IP system quickly restores signal and adjusts positioning data after entering a blind spot.
4. Reliable Data: Cross-verification between the two IP addresses ensures more reliable location information.
5.Better User Experience: Continuous and accurate positioning in complex environments enhances user experience, crucial for real-time applications like transportation and logistics.
Product Application Scenarios
Variety of Scenarios
GT04A is a wired GPS tracker, is a reliable 4G LTE Cat 1 network coverageit is equipped with 9-90v wide voltage and has overvoltage protection functionIt supports real-time positioning and historical trajectory playbackas well as dual-lP blind spot compensationallowing you to always know the vehicle trajectory
Platform
Company Profile
Our Advantages
FAQ
| Alarm function: |
| 1)Overspeed alarm: When the vehicle speed exceeds the set range, an alarm signal will be sent. This alarm is generally generated to remind the owner to drive safely. The switch and overspeed threshold can be set through SMS commands. |
2)Vibration alarm: After the vehicle is turned off, the delay device will automatically enter the defense state (the defense function needs to be turned on). After entering the defense, if the car vibrates abnormally, an alarm signal will be sent to the platform. You can choose SMS alarm and phone alarm, SMS and phone alarm (SOS number needs to be set).
|
3)Power failure alarm: When the device detects that the main power supply of the car is disconnected, it will trigger an alarm, turn on the backup power at the same time, and send an alarm signal to the platform. If this is an alarm, first determine whether the car is running normally and whether the main power supply is not strong enough when installing the locator.
|
|
4)Built-in low power alarm: When the device is disconnected from the external power supply, it uses the built-in backup battery to work. When the battery drops to a level that it cannot work normally, an alarm is issued to remind the user to check. |
Audited Supplier 
){kind=link}