GH13--Targestar HD Camera Mobile DVR Front And Rear 4G Dual Road Dashcam Live Video Monitoring SD Card Car Black Box Auto Electronics Dash Cam With GPS Wifi For Truck Bus
| Feature&Size of Product |
| Communication Frequency Band |
4g Full Netcom
Band 1,3,5,8,34,38,39,40,41 |
| Working Current |
Open Infrared:210 Ma @ 12 v |
|
Normal: 150 Ma @ 12 v |
|
Dormancy: 5 Ma @ 12 v |
| Video Storage Code Rate |
600 Kbps ~ 1 Mbps For Adaptation.5 |
| Video Upload Code Rate |
300 Kbps ~ 512 Kbps For Adaptation |
| Storage Medium |
Class 10 And Above The High-Speed TF Card * 1 |
| Power Line |
Special BMW Head (With Alarm Button) |
| Io Line |
Custom High 1, Custom Low 1, Rs232 Serial Port, Speed Pulse Acquisition Pulse Acquisition |
4G Dual-road Dashcam Function Declaration:
- Two-way 1080P real-time HD video recording
- The TF card video recording storage
- 4G CAT1 The whole network high qing live broadcast, playback
- GPS + BD dual-mode real-time positioning
- Indoor intelligent infrared night vision
- H.265 HD encoding
- Emergency video upload
- Built-in MIC audio acquisition
- Robbery, custom high and low trigger, external RS232 serial port
FAQ:
1.How to record an emergency video?
Emergency video recording is enabled by default. If the dash cam detects any collisions, it will automatically record an emergency video.
Also the recording process cannot be interrupted. Once the emergency recording is completed, the dash cam will automatically switch back to normal video recording mode.
2.Why the dash cam stops recording?
If the dash cam automatically stops recording, please use the following to solve the problem,
1) Restoring dashcam to factory settings
2) Formatting the internal memory card
3) Updating firmware
4) Detecting abnormality in the internal memory card (e.g., non-dash cam-related files). In this case, please format the internal memory card.
After exiting these operations, the dash cam will automatically resume recording.
3.No driving route data displays on the app/platform
1) The positioning system on the dashcam is not functioning and cannot obtain positioning information.
Solution: Check the dashcam's GPS light. If it is not lit, move the dash cam to an open space and wait for approximately 3 minutes before trying again.
2) The car did not move, hence no driving record data was generated.
Solution: Ensure that the dashcam is correctly installed in the car and operating normally. Drive the car a certain distance to generate driving record data.
3) The phone has no network connection. The phone requires a network connection to load the map when viewing driving records.
Solution: Disconnect the phone from the dashcam's Wi-Fi hotspot and connect it to a network (WLAN or mobile data network).
4.Why does ADAS calibration fail?
1) The dashcam's camera is not positioned correctly, too far from the center front, i.e. too close to the left and right sides or the upper and lower sides.
2) The nighttime light is too dim, making it difficult to identify the lane line accurately.
3) The lane line appears blurred, making it impossible to identify.
){kind=link}
){kind=link}