4G Dual Lens HD Dashcam
GD15
GD15 is a driving recorder with a 3-inch capacitive touch screen display, with a resolution of 640 * 360P.
Parameters can be set and preview interface can be switched through the touch screen.
At the same time, the camera of the device itself supports ADAS function, which can provide safety for our driving more intelligently.
The rear camera equipped with it is waterproof and can withstand high temperatures and cold temperatures, highlighting its ability to work normally in harsh environmental conditions.
The host has multiple wireless connection functions such as WiFi, Bluetooth, and hotspot.
| GD15 Parameter Specification Sheet |
| Chipset |
Spreadtrum SL8541E Quad core [email protected]+S206 |
| Storage |
Flash ROM |
32GB EMMC |
| RAM |
2GB LPDDR3 |
| Operating System |
Android 10.0 |
| Navigation |
Support |
| Remote Monitor |
Supports APP and PC monitoring (personal car assist, fleet CMSV6) |
| Frequency Band |
GSM:B2/B5/B3/B8;WCDMA:B1/B2/B4/B5/B8;LTE:B1/B2/B3/B4/B5/B7/B8/B12 |
|
| JTT808/JTT1078 |
Support |
| Bluetooth |
Bluetooth 4.0 support master-slave devices and playing music |
| Video formats |
TS |
| Compression Technology |
H.264 |
| Parking Monitoring |
Support |
| ADAS |
Support |
| Front Cam |
GC2053;AHD1080P;F=2.0;6G lens 140 Wide Angle;H.264 |
| Rear Cam |
GC2053;AHD 720P;4G lens; H.264 |
| Temperature and Humidity range |
Temperature |
Using |
-20ºC~+70ºC |
| Storage |
-30ºC~+80ºC |
| Humidity |
Using |
4%~90%RH |
| Storage |
40%RH |
FAQ:
1.How to record an emergency video?
Emergency video recording is enabled by default. If the dash cam detects any collisions, it will automatically record an emergency video.
Also the recording process cannot be interrupted. Once the emergency recording is completed, the dash cam will automatically switch back to normal video recording mode.
2.Why the dash cam stops recording?
If the dash cam automatically stops recording, please use the following to solve the problem,
1) Restoring dashcam to factory settings
2) Formatting the internal memory card
3) Updating firmware
4) Detecting abnormality in the internal memory card (e.g., non-dash cam-related files). In this case, please format the internal memory card.
After exiting these operations, the dash cam will automatically resume recording.
3.No driving route data displays on the app/platform
1) The positioning system on the dashcam is not functioning and cannot obtain positioning information.
Solution: Check the dashcam's GPS light. If it is not lit, move the dash cam to an open space and wait for approximately 3 minutes before trying again.
2) The car did not move, hence no driving record data was generated.
Solution: Ensure that the dashcam is correctly installed in the car and operating normally. Drive the car a certain distance to generate driving record data.
3) The phone has no network connection. The phone requires a network connection to load the map when viewing driving records.
Solution: Disconnect the phone from the dashcam's Wi-Fi hotspot and connect it to a network (WLAN or mobile data network).
4.Why does ADAS calibration fail?
1) The dashcam's camera is not positioned correctly, too far from the center front, i.e. too close to the left and right sides or the upper and lower sides.
2) The nighttime light is too dim, making it difficult to identify the lane line accurately.
3) The lane line appears blurred, making it impossible to identify.
){kind=link}