Great-will Targestar GD95L 4G Car Truck WiFi GPS Tracking Dash Cam Dual Lens ADAS DMS 1080P Driving Video Recorder Dash Camera
| GD95L Dash Cam 4G FEATURES: |
- Built-in high performance image processing chip
- H.264/H.264+ encoding, high compression ratio
- 1ch front facing 1080P camera
- 1ch rear facing 1080P camera
- Unique GPS drift suppression algorithm
|
Power:
- Professional In-Vehicle power design, 9-32V DC Wide Voltage Range
- Multi protection circuits like under-voltage, short, reversed plug-in
- Smart power management system, shutdown under low voltage, low consumption when standby
|
Data Storage:
- Special file management system to encrypt and protect the data
- Proprietary technology to detect the bad track of the TF card which can make sure the continuity of video and long service life of the TF card
- Built-in ultracapacitor, avoid data loss and TF card damage caused by sudden outage
- Support TF card storage, maximum 512G
|
Wireless module:
- Built-in 4G module with 4G all-access support
- Support GPS/BD/GLONASS, high sensitivity, fast positioning
- WIFI module (optional), frequency 2.4ghz
- Built-in 4G,GNSS,WIFI antenna
|
GD95L dual-camera dash cam 4G high-definition driving recorder adopts H.265 video codec technology to realize analog high-definition video recording, storage and playback.
Combined with 3G/4G wireless transmission technology and positioning technology, it can realize video recording, real-time uploading of vehicle driving record information, driving behavior analysis and alarm evidence uploading.
The vehicle can be remotely monitored, analyzed and processed in real time through the control center.
FAQ:
1.How to record an emergency video?
1)Emergency video recording is enabled by default. If the dash cam detects any collisions, it will automatically record an emergency video.
2)Also the recording process cannot be interrupted. Once the emergency recording is completed, the dash cam will automatically switch back to normal video recording mode.
2.Why the dash cam stops recording?
If the dash cam automatically stops recording, please use the following to solve the problem,
1)Restoring dashcam to factory settings
2)Formatting the internal memory card
3)Updating firmware
4)Detecting abnormality in the internal memory card (e.g., non-dash cam-related files). In this case, please format the internal memory card.
After exiting these operations, the dash cam will automatically resume recording.
3.No driving route data displays on the app/platform
1)The positioning system on the dashcam is not functioning and cannot obtain positioning information.
Solution: Check the dashcam's GPS light. If it is not lit, move the dash cam to an open space and wait for approximately 3 minutes before trying again.
2)The car did not move, hence no driving record data was generated.
Solution: Ensure that the dashcam is correctly installed in the car and operating normally. Drive the car a certain distance to generate driving record data.
3)The phone has no network connection. The phone requires a network connection to load the map when viewing driving records.
Solution: Disconnect the phone from the dashcam's Wi-Fi hotspot and connect it to a network (WLAN or mobile data network).
4.Why does ADAS calibration fail?
1)The dashcam's camera is not positioned correctly, too far from the center front, i.e. too close to the left and right sides or the upper and lower sides.
2)The nighttime light is too dim, making it difficult to identify the lane line accurately.
3)The lane line appears blurred, making it impossible to identify.
){kind=link}