Customization: | Available |
---|---|
Screen Size: | No Screen |
Use: | Automotive |
Still deciding? Get samples of US$ 26/Piece
Request Sample
|
Suppliers with verified business licenses
Audited by an independent third-party inspection agency
Module | Function | Fucntion Description |
Real Time Tracking | Return positioning information such as longitude and latitude according to the set interval time. | |
Vehicle Status Detection |
Ignition/Shutdown Status | Each uploaded data packet contains ACC ON/OFF status. |
Vehicle Power-off Reminder | When the host detects that the vehicle voltage is low to a certain value (less than 5V), it will report a power off reminder. | |
Over Speed Alarm |
The platform sets a maximum speed limit value. When the GPS speed exceeds the set value, an overspeed alarm reminder will be reported.
|
|
Oil Circuit Inspection | Support platform and SMS power off and on functions. | |
Other Functions |
Blind Spot Supplementary Transmission Function | When the terminal is located and not online, data will be stored. Upload data when there is a signal going online normally. |
EPO Assisted Positioning Function | The terminal supports EPO assisted positioning function to enhance positioning effectiveness. | |
Inflection Point Supplementary Transmission | When the directional angle of the device changes by more than a certain angle, immediately upload a position data to optimize the trajectory. | |
Remote Upgrade | Upgrade the butler remotely. | |
Low Power Consumption | Static Mode | The 3D three-axis acceleration sensor senses the real-time vibration status of the vehicle. When powered on, it is in motion mode. When the terminal is stationary for 5 minutes, it is in stationary mode. The GPS module is turned off, and if there is vibration, it enters motion mode. |