Product Description
Product Function
| GD15 Parameter Specification Sheet |
| Chipset |
Spreadtrum SL8541E Quad core [email protected]+S206 |
| Storage |
Flash ROM |
32GB EMMC |
| RAM |
2GB LPDDR3 |
| Operating System |
Android 10.0 |
| Navigation |
Support |
| Remote Monitor |
Supports APP and PC monitoring (personal car assist, fleet CMSV6) |
| Frequency Band |
GSM:B2/B5/B3/B8;WCDMA:B1/B2/B4/B5/B8;LTE:B1/B2/B3/B4/B5/B7/B8/B12 |
|
| JTT808/JTT1078 |
Support |
| Bluetooth |
Bluetooth 4.0 support master-slave devices and playing music |
| Video formats |
TS |
| Compression Technology |
H.264 |
| Parking Monitoring |
Support |
| ADAS |
Support |
| Front Cam |
GC2053;AHD1080P;F=2.0;6G lens 140 Wide Angle;H.264 |
| Rear Cam |
GC2053;AHD 720P;4G lens; H.264 |
| Temperature and Humidity range |
Temperature |
Using |
-20ºC~+70ºC |
| Storage |
-30ºC~+80ºC |
| Humidity |
Using |
4%~90%RH |
| Storage |
40%RH |
Product Display
Platform
Support multiple high-definition videos
Support 4G network data transmission and positioning
Voice support for intercom/monitoring
Remote real-time positioning and trajectory playback
Remote real-time video and playback
AI alarm video upload
Support ADAS/DMS automatic recognition and calibration
Advanced Driver Assistance Systems (ADAS)
Driving behavior monitoring function (DSM)
Support DMS left and right steering wheel settings
Support integration of in car camera, driver DMS, and video surveillance
RS232/IO and other extensions
Company Profile
FAQ
1.How to record an emergency video?
Emergency video recording is enabled by default. If the dash cam detects any collisions, it will automatically record an emergency video.
Also the recording process cannot be interrupted. Once the emergency recording is completed, the dash cam will automatically switch back to normal video recording mode.
2.Why the dash cam stops recording?
If the dash cam automatically stops recording, please use the following to solve the problem,
1) Restoring dashcam to factory settings
2) Formatting the internal memory card
3) Updating firmware
4) Detecting abnormality in the internal memory card (e.g., non-dash cam-related files). In this case, please format the internal memory card.
After exiting these operations, the dash cam will automatically resume recording.
3.No driving route data displays on the app/platform
1) The positioning system on the dashcam is not functioning and cannot obtain positioning information.
Solution: Check the dashcam's GPS light. If it is not lit, move the dash cam to an open space and wait for approximately 3 minutes before trying again.
2) The car did not move, hence no driving record data was generated.
Solution: Ensure that the dashcam is correctly installed in the car and operating normally. Drive the car a certain distance to generate driving record data.
3) The phone has no network connection. The phone requires a network connection to load the map when viewing driving records.
Solution: Disconnect the phone from the dashcam's Wi-Fi hotspot and connect it to a network (WLAN or mobile data network).
4.Why does ADAS calibration fail?
1) The dashcam's camera is not positioned correctly, too far from the center front, i.e. too close to the left and right sides or the upper and lower sides.
2) The nighttime light is too dim, making it difficult to identify the lane line accurately.
3) The lane line appears blurred, making it impossible to identify.
Audited Supplier 
){kind=link}